A1Q9GMX200XB3
Q9 Computer Display for A1 2" Aluminum Body (30-300 GPM)
(Replacement for Q9 computer display only)
$432.00
Features & Benefits
- Kit consists of Computer Display, batteries, O'ring seal, gasket, screws, manual and declaration of conformity (does not contain sensor)
- Fits A1 Aluminum 2" body only. Replaces LCD computer display labeled A1Q9GMA200NA2, A1Q9LMA200NA2 or A1Q9GMX200XB3.
- LCD Computer Display programmed to display in Gallons Per Minute. Flowrate display updates every 5 seconds, readout is in units/minute. Factory Calibration in gallons and liters is standard. Can be field calibrated to adjust to various fluid viscosities. Correction calibration lets end user calibrate by ± percent off.
- Internal Power: (2) 1.5V Akaline batteries. Battery life (2 years). Std Factory Configuration: 2 Totals (1 Resettable, 1 Cumulative). Factory Calibration in gallons and liters. Totalizing Registers: 0 to 2, K-Factor Limits: Min: .01 pulses/unit Max: 999,999 pulses/unit. Field Calibrate by user. Standard Method: Correction Factor. Six adjustable digits. Can be reconfigured to K-factor entry. Readouts: LCD with floating decimal. Minimum Display = 0.01 units Maximum Display = 999,999 units (6 digits). Impulse Rate: Minimum (Pulse-in Input) = DC (0 Hz) Minimum (Coil Input) = Approximately 10 Hz Maximum = Approximately 1,000 Hz. Storage Temperature: -40 F to 158 F (-40 C to 70 C). Note: Part number is dependent on material and size of flow meter.
- IF NOT CERTAIN THAT YOU ARE REPLACING THE Q9 COMPUTER DISPLAY, PURCHASE PART NO. A1R9GMX200XB3
0 F to 140 F (-18 C to 60 C)