A1R9GMX025XB3
R9 Computer Retrofit for 09 or Q9 Computer Display for A1 1" Low Flow Aluminum or Nylon Body (.3-3 GPM)
(Retrofits 09 or Q9 computer display)
$446.00
Features & Benefits
- Kit consists of Computer Display, sensor, batteries, O'ring seal, gasket, screws, manual and declaration of conformity
- Fits A1 Aluminum or Nylon bodies only. Replaces LCD computer display labeled A109GMA025NA1, A109GMN025NA1, A109LMA025NA1, A109LMN025NA1, A109GMX025XB3 or A1Q9GMA025NA1, A1Q9GMN025NA1, A1Q9LMA025NA1, A1Q9LMN025NA1, A1Q9GMX025XB3 or A1Q9GMA025NA1, A1R9GMN025NA1, A1R9LMA025NA1, A1R9LMN025NA1, A1R9GMX025XB3
- LCD Computer Display programmed to display in Gallons Per Minute. Flowrate display updates every 5 seconds, readout is in units/minute. Factory Calibration in gallons and liters is standard. Can be field calibrated to adjust to various fluid viscosities. Correction calibration lets end user calibrate by ± percent off.
- Internal Power: (2) 1.5V Akaline batteries. Battery life (2 years). Std Factory Configuration: 2 Totals (1 Resettable, 1 Cumulative). Factory Calibration in gallons and liters. Totalizing Registers: 0 to 2, K-Factor Limits: Min: .01 pulses/unit Max: 999,999 pulses/unit. Field Calibrate by user. Standard Method: Correction Factor. Six adjustable digits. Can be reconfigured to K-factor entry. Readouts: LCD with floating decimal. Minimum Display = 0.01 units Maximum Display = 999,999 units (6 digits). Impulse Rate: Minimum (Pulse-in Input) = DC (0 Hz) Minimum (Coil Input) = Approximately 10 Hz Maximum = Approximately 1,000 Hz. Storage Temperature: -40 F to 158 F (-40 C to 70 C). Note: Part number is dependent on material and size of flow meter.
- IF NOT CERTAIN THAT YOU ARE REPLACING THE COMPUTER DISPLAY 09, Q9 OR R9 - PURCHASE THIS PART NO.
0 F to 140 F (-18 C to 60 C)